A makwaara dị ka
- Polyurtethane Red agba na-acha ọbara ọbara, polyurethane iron na-acha uhie uhie mgbochi na-emegide corrosonion primer, polirethane iron na-acha ọbara ọbara mgbochi mgbochi.
Paramita
| Ngwongwo dị ize ndụ No. | 3364 |
| Un mba | 1263 |
| Ihe mgbaze dị egwu | 64 m |
| Udi anumanu | Jinhui agba |
| Mogosi | S50-1 |
| Agba | Iron uhie |
| Mixgwakọta | Onye nnọchi anya: Cultunglọ Ahịa = 20: 5 |
| Mputa | Dị larịị na nke dị larịị |
Efrata
- Polyurtethane Red Red Primer (Red polyurethane) mejupụtara resin na-acha uhie uhie, ndị na-eme ihe na-acha ọbara ọbara, wdg.
Ndi mmadu
- Ezigbo ihe eji eme ihe.
- Ezigbo adhesion iji mesoo steel.
- Ezigbo ọnọdụ okpomoku di ala.
- Ezigbo mmiri na nguzogide corrosion.
- Ihicha ngwa ngwa na ezigbo nguzosi.
Paractures (Nkebi)
- Ọnọdụ dị na akpa: ọ nweghị ihe na-akpali akpali mgbe ọ na-akpali ma na-agwakọta, na otu uniform
- Ewuru: Enweghị mgbochi maka ngwa
- Ihe nkiri ọhụụ: nkịtị
- Njuon nnu na-eguzogide: Enweghị cracking, enweghị ọnya, enweghị pusting (Index Star: T9274-88)
- Acid na-eguzogide: Enweghị cracking, enweghị ọnya, enweghị puling (ọkọlọtọ ọkọlọtọ: GB / T9274-88)
- Nguzogide Alkali: Enweghị ọgba aghara, enweghị ọnya, enweghị pusting (Index Standard: GB / T9274-88)
- Idogide nguzogide: 1mm (Index Standard: GB / T1731-1993)
- Oge ihicha: elu ihicha ≤ 1h, apata nkụ ≤ 24h (ọkọlọtọ ọkọlọtọ: GB / T1728-79)
- Mmetụta Mmetụta: 50cm (Index Standard: GB / T4893.9-1992)
Ojiji
- Kwesịrị ekwesị maka steel, tank, tank mmanụ, kemịkalụ kemịkalụ, igwe elektrik, ụgbọ njem dị ka mkpuchi na-eme mkpọchi.
Ọgwụgwụ elu
- Igwe dị n'elu mmiri na SA2.5 ọkwa, elu isi ike 30UM-75UM.
- Ngwa eletriki na-agbada na ST3 klas.
Ngwugwu tupu oge
- Kpamkpam na-ese n'elu ya n'elu nchara nke Rrip na-ewepụ ogo na-ewepu ogo SA2.5.
Mgbe ọ gachara
- Polyurethane Mica, Polyurethane Pao, Acrylic Elu uwe elu, elu uwe elu.
Parames owuwu
- Ọkpụkpụ ihe nkiri a na-atụ aro: 60-80UM
- Usoro usoro ihe omume: Ihe dị ka 115g / m² (dabere na 35UM akọrọ na 35um akọrọ, na-ewepu mfu).
- Ọnụ ọgụgụ eserese a tụrụ aro na: 2 ~ 3 na-agafe
- Nchekwa nchekwa: -10 ~ 40 ℃
- Ọnọdụ ewu: 5 ~ 40 ℃
- Oge nnwale: 6h
- Sprivezọ Ewu: brushing, ikuku spraying, mpịakọta nwere ike ịdị.
- Eserese nkeji:
Mkpụrụ okpomọkụ ℃ 5-10 15-20 25-30
Oge dị mkpirikpi H48 24
Oge dị ogologo karịa ụbọchị asaa. - Funcestrete okpomọkụ ga-adị elu karịa 3 ℃, mgbe mkpụrụ okpomọkụ dị ala karịa 5 ℃, ekwesighi ịrụ ihe nkiri a.
Eserese owuwu
- Mgbe emechara rọrọ nke a, a ga-emeghe nke ọma, wụsa akụrụngwa B n'ime ihe dị n'okpuru 30mins, wee tinye ego nke kwesịrị ekwesị ma mezie ya ya na viccordiction vicecorse.
- Nwee: dichant pụrụ iche maka usoro polyurethane.
- Airless spraying: Dilution amount is 0-5% (by weight ratio of paint), nozzle calibre is 0.4mm-0.5mm, spraying pressure is 20MPa-25MPa (200kg/cm²-250kg/cm²).
- Air spraying: Dilution amount is 10-15% (by weight ratio of paint), nozzle calibre is 1.5mm-2.0mm, spraying pressure is 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Ihe mkpuchi mkpuchi: Ọnụ ego dị nro bụ 5-10% (n'ihe gbasara eserese dị arọ).
Mkpachapụ anya
- Na oge a na-arụ oge owuwu, dị mfe nkụ, iji zere ịgba ọkụ nwere ike idozi ya na dị gịrịgịrị ruo mgbe ọ bụ nkụ.
- Ekwesịrị iji ngwaahịa a site n'aka ndị ọrụ eserese dịka ntuziaka si dị na ngwugwu ngwaahịa ma ọ bụ akwụkwọ ntuziaka a.
- A na-eme ihe mkpuchi na iji ngwaahịa a kwekọọ na ahụike niile dị mkpa, nchekwa na ụkpụrụ gburugburu ebe obibi.
- Ọ bụrụ na inwe obi abụọ banyere ma ekwesịrị iji ngwaahịa a, biko kpọtụrụ Ngalaba Ọrụ Ngalaba anyị maka nkọwa.
